Mobile decoders
HD08100
levitra prospecto this page
HD08100 a standard DCC Mobile decoder, supports RailCom bi-directional data communications and standard NEM652 8-pin connector.
Integrated smart motor control technology ensures excellent stability in locomotive movement and very low operating noise.
It supports eight light effects in each function output and all function outputs can be configured independently.
All kinds of programming modes are supported, including POM (Programming on the Main) mode.
HD08100 install decoder and demo video
ND-DE290
ND-DE290 mobile DCC decoder is designed for N scale locomotive. ND-DE290 supports 6 function output and 4 built-in lighting effect per output.
All kinds of programming modes are supported.
The ND-DE290 installed to the EF64
ND-N54K0
ND-N54K0 mobile DCC decoder is designed for N scale locomotive. ND-N54K0 supports 3 function output and 6 built-in lighting effect per output.
You can install EF510, DE10, Bernina Express, EF81, EF65.
The ND-N54K0 installed to the EF81.
ND-EH200
ND-EH200 mobile DCC decoder is designed for N scale locomotive(EH200). ND-EH200 supports 2 function output and 4 built-in lighting effect per output.
The ND-EH200 installed to EH200
ND-DEM131
ND-DEM131 mobile DCC decoder is designed for N scale locomotive. DEM131 can install for the Kato train.
ND-ND51
ND-ND51 mobile DCC decoder is designed for N scale locomotive. ND-N54K0 supports 4 function output and 6 built-in lighting effect per output. ND51 can install for the Kato DD51.
The ND51 decoder installed the DD51.
K-RD01
K-RD01 is a modified adapter plate for Kato steam locomotive.
Built-in tail lamp LED. There is a motor, front lamp and track power contact.
6pin DCC decoder can be plugged in directly.
FD100
FD100 function decoder is designed for locomotive and coach applications in HO and N scale. FD100 supports 4 function outputs and 9 built-in lighting effects per output.
Any locomotive decoder can easily extend its function outputs by combined with FD100.
FD100 can also be assembled with HA24100 light bar for user preferred coach light application, such as two HA24100 and one FD100 are assembled for the double-decker coach light in IC-2000.
K-SD605
The K-SD605 signal light decoder modified Kato signal light can be used for DCC control.
K-SD605 has two control modes to change the signal. One is to use the detection switch in the original track to switch the signal, the other is to use the DCC controller to switch the signal.
T-SD5562
The T-SD5562 signal light decoder modified Tomix signal light can be used for DCC control.
T-SD5562 has two control modes to change the signal. One is to use the detection switch in the original track to switch the signal, the other is to use the DCC controller to switch the signal.
Coach light
LD100
LD100 integrates decoder,10 LED and two sets of output for tail light. This LD100 is not only compliant with NMRA (DCC) specification, but also suitable for all types of coach in HO and N scale.
For assembly convenience, the LD100 can be easily cut to fit the size of the vehicle and two kind of LED light are available, cool white and warm white for users’ preference.
LDT100
LDT100 integrates decoder,8 LED and two sets of output for tail light. This LDT100 is not only compliant with NMRA (DCC) specification, but also suitable for all types of coach in N scale.
The LDT100 have two kind of LED light are available, cool white and warm white for users’ preference.
HA24100
HA24100 integrates 10 LED and two sets of output for tail light.HA24100 is suitable for all types of coach in HO and N scale. For assembly convenience, the HA24100 can be easily cut to fit the size of the vehicle and two kind of LED light are available, cool white and warm white with brightness adjustable for users’ preference.
ND-LKD200
ND-LKD200 integrates two LED output for KATO coach light. One output can be directly assembled with the KATO LED and the other output can be connected to another LED to implement pantograph flash effect.
Pantograph flash effect demo video
TA100
TA100 integrates 11 LED for Tomix coach.
Turnout decoders
KI-AD100
KI-AD100,a one output port/two-wire turnout decoder with small footprint (20 mm x 15mm), is very easy to be installed on the turnout. KI-AD100 is designed to support both KATO track and TOMIX track.
The supported address range of the KI-AD100 is from 1 to 2047.
K-AD100
K-AD100, a two output ports/two wire turnout decoder, is very easy to be installed on the turnout.
K-AD100 is designed to support both KATO track and TOMIX track.
The supported address range of the K-AD100 is from 1 to 2047.
AD100
AD100,a two output ports/three-wire turnout decoder, support two sets of turnout LED output for indicating the turnout status.
The AD100 is designed to support both European regulations and US regulations.
The supported address range of the K-AD100 is from 1 to 2047.
KAD200
KAD200 is a turnout decoder with eight output ports.
KAD200 supports both two-wires (KATO/Tomix) and three-wires (European regulations and US regulations) systems.
The supported address range of the KAD200 is from 1 to 2047.
KAD400
KAD400 is a turnout decoder with eight output ports.
KAD400 supports both two-wires (KATO/Tomix) and three-wires (European regulations and US regulations) systems.
The supported address range of the KAD400 is from 1 to 2047.
KAD800
KAD800 is a turnout decoder with eight output ports.
KAD800 supports both two-wires (KATO/Tomix) and three-wires (European regulations and US regulations) systems.
KAD800 supports DC(analog) and DCC(digital) with the same control method.
In the DC(analog) mode, KAD800 can be connected with RCA100 by single 6P wire for eight outputs even in a large application scale. The only thing is to use longer single 6P wire instead of eight longer cables for each output port of KAD800.
The supported address range of the KAD800 is from 1 to 2047.
Combined with RCA100, KAD800 can used to control turnout without any further setting.The LED and button on RCA100 are related to each port of KAD800 (ie. each connected turnout) for status and controlling.
K-AD8101
K-AD8101 provides the K-ADxxx series of external power adapter boards. After connection, you can use the external power to switch the turnout motor to reduce the power loss of the DCC controller. If you need to switch more than two turnout motors at the same time, you can use the K-AD8101 to expand the connection.
RCA100
Combined with KAD800, RCA100 turnout controller is used to control eight turnoutsmaximally without any further setting.
The eight buttons and eight LEDs are related to eight output ports of KAD800 correspondingly.
The power supply to RCA100 is 15V DC.
6P Wire
6P Wire is used to connect KAD800 and RCA100. Users can choose the cable with suitable length according to their application scale.
KI-AD2302L
KI-AD2302L DCC decoder is used in Kato HO turnout. It can directly replace the PCB in the turnout. After replacement, it can be directly used in the DCC system.
KI-AD2303R DCC decoder is used in Kato HO turnout. It can directly replace the PCB in the turnout. After replacement, it can be directly used in the DCC system.
Booster
Booster5
The Booster5 is a booster for DCC power and can be applied in HO and N scale. This Booster5 can provide 3 Amp output current with track short protection. The voltage range of Booster5 is adjustable from 12V to 20V.
Railcom Display
RC100
The RC100 is a Railcom LCD display , user can use to show any data such as address and CV value.
Speedometer
SPC100R
The SPC100R is a Speedometer. SPC100R can measure Z/N/HO/OO/TT/3ft/O/S/G/1 gauge driving speed.
It is divided into four regions, the United States, the United Kingdom, Europe, and Japan. Each region has a corresponding specification menu.
The single lap timing function can measure the time to complete a lap and can be used to adjust the speed of the vehicle.
The speed unit can be switched between kilometers and miles. The speed is automatically displayed after the vehicle passes.
Thank you for the modification suggested by Tramfabriek.